X K Ka Superwide Radar/Laser Detector
(220-1656)                 Operation                  Faxback Doc. # 18229

TURNING THE DETECTOR ON AND OFF

To turn on the detector, turn OFF VOLUME away from you until it clicks.

The detector sounds a distinctive tone for each band as a self test.  Then
all indicators turn off except the POWER indicator.

To turn off the detector, turn OFF/VOLUME toward you until it clicks and
all indicators turn off.

ADJUSTING THE VOLUME

To change the detector's volume, turn OFF/VOLUME either away from or
toward you.

SELECTING THE CITY AND HIGHWAY MODES

The city mode reduces the detector's sensitivity to weak X-, K-, and 
Ka-band signals.  This eliminates responses to most false sources, such as
automatic door openers and alarm systems.

To select the city mode, press CITY/HIGHWAY until the CITY indicator turns
on.

NOTE:  The city mode has no effect on laser alerts.

       The highway mode provides maximum sensitivity for open-road
       driving.

       To select the highway mode, press CITY/HIGHWAY until the CITY
       indicator turns off.

RECEIVING AND IDENTIFYING RADAR AND LASER SIGNALS.

When you turn on your detector, it sounds alert tones in the following
order:  X, K, Ka, and Laser.

When your detector senses a laser or radar signal, it gives different
audible alarms for each signal.  In addition, the alert tone pulse rate
increases with signal strength.

When your detector senses instant-on radar, it sounds three beeps three
times in 2 seconds.  Then the detector sounds continuous beeps until you
pass the radar source.  The instant-on radar detection circuit operates in
both the city and highway modes.


(PH 11/9/95)