70-Watt Stereo Graphic Equalizer/Booster
(120-1961)                 Specifications             Faxback Doc. # 18417

Output Power................................70 Watts (35 Watts per channel)
                                           RMS (into 4-Ohm load) at 10% THD
Frequency Response......................................30-25,000 Hz+/-3 dB
Total Harmonic Distortion....................................Less than 0.3%
                                                          (40 Watts output)
Signal Input Impedance..............................................47 Ohms
                                                   (4 or 8 Ohms acceptable)
Tone Control Center-Frequencies..............................60 Hz, 150 Hz,
                                   400 Hz, 1 kHz, 2.4 kHz, 6 kHz and 15 kHz
Tone Control Range........................+/-12 dB at each center frequency
Input Sensitivity.........................................3.0 volts (5 pin)
                                                  0.45 volts (RCA phono/CD)
Matching Speaker Impedance......................................4 to 8 Ohms
Power Supply Voltage.................................DC 12V Negative Ground
                                                        (11 to 16V nominal)
Current Drain....................................................0.4A - 12A
Dimensions...................................1 7/8" x 6 1/4" x 6 1/2" (HWD)
Weight....................................................4.85 lbs (2.2 kg)


(CS 11/22/95)