Stereo Frequency Equalizer/Booster
(120-1863)                 Specifications             Faxback Doc. # 33230

Maximum Output Power: ............... 20 watts per channel; 40 watts total
  (with two 4 ohm speakers connected)                         (@ 5V Input)
Frequency Response: ................................ 30-30,000 Hz, +- 3 dB
Total Harmonic Distortion (2 watts output) : ............... Less than 1 %
Separation: ........................................................ 45 dB
Tone Control Center 
            Frequencies: ................... 60 Hz, 250 Hz, 1 kHz, 3.5 kHz
                                                               and 10 kHz.
Tone Control Range: ............................................. +- 12 dB
Load Impedance: ......................... 4 Ohms per output load (Channel)
Current Drain: ................................... 5A Maximum (@ 5V Input)
Power Supply Voltage: .......................... DC, 13.8V Negative ground
Dimensions: .................................. 132(W) X 155(D) X 50(H) m/m
                                           (5.2(W) x 6.1(D) x 2(H) Inches)
Weight; .............................................. 1,300 g (2.86 lbs.)

WARNING:

Your speaker installation must have a total power capacity of at least 40
watts program material.  For example, to use two 4 Ohm speakers, each
speaker must be rated for at least 20 watts program.  The high power levels
produced by this Equalizer/Booster can damage low-wattage speakers.  In
addition, you must be sure to use only 4 or 8 Ohm speakers.  Use of
speakers rated less than 4 Ohms may damage the Booster.


(EB 6/5/96)