8" 2-Way Truck/Van Speakers  (120-1727)  Installation  Faxback Doc. # 9942

Your box speakers are designed to connect to your vehicle's stereo system.
They are specifically shaped to fit behind the seat of your pickup truck.
You  can install extended wires to let you use them outside the vehicle at 
outdoor events.

Notes:  Your speakers are designed for vehicle stereo systems of 5 watts
        or more per channel.   For the greatest enjoyment of your
        speakers, we recommend you use a power amplifier or equalizer
        booster.  Your local Radio Shack store carries a selection of
        power amplifiers and equalizer boosters.

        Do not let the speakers get wet.

CONNECTIONS

The speaker enclosures are equipped with easy-to-connect, spring-loaded 
push terminals.  Remove 1/4 to 1/2 inch of insulation from the end of the 
wire.

Then, press and hold down the terminal's grooved tab.  Insert the wire's 
bare end into the opening, and release the tab.

To ensure proper phasing and maximum bass response, connect each negative 
(-) speaker wire to the black input terminal and each positive (+) wire to 
the red input terminal.

Your local Radio Shack store has a large selection of speaker wire.

(pm/all-03/01/95)