4860 HD  (250-3540)    Using the VGALOCK.EXE Utility    Faxback Doc. # 1067

Note: Refer to Faxback Doc. # 1088 for Installation Instructions from the 
Utilities Disk.

Some applications might incorrectly identify the VGA system in your 
computer.  If this happens, the application might display incorrectly, or 
might not display or run at all. You might be able to run the application 
by locking the computer's video mode to standard VGA with the VGALOCK 
utility.  To do so, type the following from the C:\ prompt:

   CD \CLUTIL  <ENTER>
   VGALOCK ON  <ENTER>

To unlock the video mode, type the following:

   VGALOCK OFF  <ENTER>

(/tmc-04/17/95)