TANDY 1000 SL/2  (250-1402) Manual/Addendum Information Faxback Doc. # 1287

Installing a Hard Disk Card:

You must attach a special bracket to a hard disk card before you can install 
it in one of your computer's expansion slots. The bracket is provided with 
the computer (When the cover is removed, it is located on the front of the 
chassis attached with a single screw.)  If there is a bracket already 
attached to the hard disk card, remove it and attach the one that came with 
the computer.

Slip the hard disk card bracket into the appropriate mounting slot (located 
on the front of the chassis.)  Press the adapter card down into the 
expansion slot on the Main Logic Board closest to the power supply.

(/tmc-04/26/95)