3000 HD  (250-4010/4011)             Setup              Faxback Doc. # 1384

The setup program is found on the utilities diskette.  MS-DOS Version 3.2
setup can also be used.

Phoenix Software Asc. Ltd
Configuration Setup Program  Ver 3.0
(C) Copyright 1985
 
This program is used to store system configuration information into battery 
backed memory in your computer. It is necessary to run this program when
any memory, disk drives, or monitors are added to or removed from your 
system, or to set the battery maintained time or dated. Then Press <enter> 
to continue 

Are these correct ?
[Y or N ]
The battery maintained date is:     03/31/1992
The battery maintained time is:     12:32:00 

The following information is required for correct operation of your 
computer.  The current settings of your options :

Diskette Drive A:   is  1.44M
Diskette Drive B:   is  NONE
Fixed Disk Drive C: is  TYPE 38
Fixed Disk Drive D: is  NOT INSTALLED
System Base Memory  is  640K
Expansion Memory    is  1024K
Prime Video Adapter is  EGA
CPU Computer Speed  is  10MHz
BUS Computer Speed  is  8MHz

Are these options correct
(Reply Y or N then <enter>)

(/tmc-12/02/95)