4020 LX (250-5120) VGA Expansion Adapter Faxback Doc. # 1592 Your VGA expansion includes the following features: * Full IBM Personal System/2 VGA Display Adapter compatibility * Support of 132-column text modes * A color palette of more that 262,000 possible colors * Compatibility with Tandy's VGM-100, VGM-200, and VGM-300 monitors, as well as equivalent VGA monitors NOTE: The 132-column modes might require special software. Check to see whether your application software supports these modes. The VGA adapter is compatible with software written for the following video standards: * VGA (video graphics array) * MCGA (multi-color graphics array) * EGA (IBM Enhanced Graphics Array) * CGA ( IBM Color Graphics Array) * MDA ( IBM Monochrome Display Adapter) To emulate one of these video standards, use the vga.exe utility found on the Utilities Diskette. This utility is discussed in detail in the "VGA Adapter" section. If you have problems with your VGA adapter, be sure to check the following settings of the adapter's DIP switch: ┌────────────────┬────────────────────────┬─────────────────────────────┐ │ DIP SWITCH │ DEFAULT POSITION │ NOTE │ ├────────────────┼────────────────────────┼─────────────────────────────┤ │ 1 │ OFF │ ON is for special │ │ │ │ multi-frequency displays.│ ├────────────────┼────────────────────────┼─────────────────────────────┤ │ 2 │ OFF │ ON enables monochrome │ │ │ │ modes on color monitors. │ ├────────────────┼────────────────────────┼─────────────────────────────┤ │ 3 │ OFF │ Not used. │ ├────────────────┼────────────────────────┼─────────────────────────────┤ │ 4 │ ON │ ON=16-bit operation with │ │ │ │ AutoSense enabled. │ │ │ │ OFF=8-bit operation with │ │ │ │ AutoSense disabled │ └────────────────┴────────────────────────┴─────────────────────────────┘ The primary video adapter configuration is set to color. If you replace the VGA adapter with a monochrome video display adapter, you need to run the Setup program to switch the configuration to monochrome. (/tmc-05/06/95)