2500 SX/33 (250-1623) Memory Faxback Doc. # 1699 1MB SIMMS 25-5137 consists of two 1 MB x 9 SIMM chips at 60 nanoseconds. 4MB SIMMS 25-5136 consists of two 4 MB x 9 SIMM chips at 60 nanoseconds. This product can be obtained from Tandy National Parts. ┌─────────────────────────────────────────┐ │ Tandy 2500SX/33 - Expand from 2 MB: │ ├─────────────────────────────────────────┤ │ Add to Bank 1 │ ├───────┬─────────────────────────────────┤ │ 4MB │ 25-5137 │ ├───────┼─────────────────────────────────┤ │ 10MB │ 25-5136 │ ├───────┴─────────────────────────────────┤ │ Beyond 10 MB use a Third Party Memory │ │ Expansion adapter. See vendor │ │ instructions for chip kits to use. │ └─────────────────────────────────────────┘ Bank 0 on the main logic board has 2 MB of permanently installed memory. Bank 1 consists of two empty SIMM sockets into which you can install two 60 ns 1MB or 4MB SIMMs. The following table lists the possible memory configurations: ┌─────────────┬─────────────┬────────────┐ │ Total │ Number of │ Type of │ │ Memory │ SIMMs In │ SIMMs in │ │ │ Bank 1 │ Bank 1 │ ├─────────────┼─────────────┼────────────┤ │ 2 MB │ 0 │ --- │ default │ 4 MB │ 2 │ 1MB │ │ 10 MB │ 2 │ 4MB │ └─────────────┴─────────────┴────────────┘ After installing the SIMMs, run the setup utility to complete the installation. Faxback Document # 1674 will provide specific instructions on using the SETUP46.COM utility. Back of Computer ┌──────────────┬───┬─┬─┬─┬─┬───────┬──────────┬─┬────┬───┬─┬─┬─┬──────────┐ │ └───┘ └─┘ └─┘ └──────────┘ └────┘ └─┘ └─┘ │ │ ┌─┐ SIMM │ │ ° │ │<── Riser Card Sockets ───┐ │ │ ° │ │ (Bank 1) │ │ │ ° │ │ ┌─┬─┐ │ │ │ │ │ │ │ │ │ ┌───────┐ │ │ │ │ │ │ │ ├───────┤ │ │ │ │ │ │ │ └───────┘ │ │ ┌─────────┐ │ │ │ │ │ ├─┤ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ ┌───┐ │ │ │ │ │ │ │ │ │ │ │ │ │ └─────────┘ └─┴─┘ │ │ └───┘ │ │ ┌──────────────┐ ┌───────────┐ │ │ └─┘ └──────────────┘ └───────────┘ │ └─────────────────────────────────────────────────────────────────────────┘ (rjs/tmc-06/03/95)