2500 SX/33  (250-1623)    Windows 3.0 Drivers          Faxback Doc. # 1731


Your Utilities & VGA Drivers diskette contains Windows drivers for the
following video modes:

┌──────────────────────────────────────┬─────────────────────────────┐
│Driver Name                           │ Resolution                  │
├──────────────────────────────────────┼─────────────────────────────┤
│16_1024.DRV     (Multi-Resolution)    │ 640x480, 16 Colors          │
│                                      │ 800x600, 16 Colors  (1)     │
│                                      │ 1024x768, 16 Colors (1,2)   │
├──────────────────────────────────────┼─────────────────────────────┤
│256_1024.DRV    (Multi-Resolution)    │ 640x480, 256 Colors (2)     │
│                                      │ 800x600, 256 Colors (1,2)   │
└──────────────────────────────────────┴─────────────────────────────┘
(1) Requires a multiple-frequency monitor
(2) Requires 512KB of video memory

┌──────────────────────────────────────────┐
│Installing the Windows 3.0 video drivers: │
└──────────────────────────────────────────┘

To install the drivers onto the hard drive, Windows 3.0 must first
be installed. Then, perform the following steps:

1.   Insert the video drivers diskette into drive A.

2.   Type the following commands:
        A: [ENTER]
        CD \WIN30 [ENTER]
        VIDSETUP C:\windows [ENTER]

Note: "windows" specifies the directory containing Windows 3.0
      and [ENTER] specifies the [ENTER] key.

3.   The drivers are copied to your hard drive and a menu lists
     the available modes. Select the video mode you wish to
     use. Be sure your monitor can operate in the selected video
     mode.

┌───────────────────────────────────────┐
│Changing the Windows 3.0 video driver: │
└───────────────────────────────────────┘

To use a different super VGA video driver, perform the following steps:

1.   Type the following commands:
     C: [ENTER]
     CD \windows [ENTER]
     VIDSETUP [ENTER]

Note: "windows" specifies the directory containing Windows 3.0
      and [ENTER] specifies the [ENTER] key.

2.   A menu lists the available video modes. Select the video mode
     you wish to use. Be sure your monitor can operate in the
     selected video mode.

(jej-05/11/94)