2500 SX/33 
(250-1623)    Installing an Expansion Adapter         Faxback Doc. # 1739


To install an expansion adapter, follow these steps:

1. Remove the screw from an expansion slot cover at the back of the
   computer.

2. Slide the metal slot cover out of the expansion slot.

3. Hold the expansion adapter so that the mounting bracket is at the back 
   of the unit. Carefully align the expansion adapter with the riser card.
   Press the expansion adapter into the expansion slot and the expansion
   adapter guide. Be sure the adapter is fully seated.

4. Secure the contoured lip of the mounting bracket to the back of the 
   computer, using the screw previously remove from the slot cover.

5. Run the setup utility after installing the expansion adapter. 

Faxback Document # 1674 will provide details on running the setup utility.

(jej/tmc-09/11/95)