2500 SX/33  
(250-1623)                 Disk Mastering             Faxback Doc. # 1751

The 2500 SX/33 is the first Tandy computer to offer "Disk Mastering" on the
hard disk drive. The "Disk Mastering Utility" provides the end user a 
method for making mirror image copies of the original installation 
diskettes.  The Disk Mastering utility should be the first Icon selected 
when first turning on your computer. These utilities will make the "Master"
diskettes for Windows 3.1 and Works 2.0, since these disks are not included
with the system.

   1. The diskettes that are included are:

      The customer should receive three (3) diskettes with the unit.

         2 MS-DOS 5.0 disks
         1 Utilities and VGA Drivers disk.

   NOTE: The Utilities and VGA Drivers disk will allow the user to 
         configure for super vga modes*. There are no additional driver 
         disks needed to support SVGA video modes. The video chip on the 
         2500 SX/33 is a Cirrus Logic video chip and is different than the
         previous Western Digital video chip used on other 2500 series
         computers.  Do not use any other SVGA drivers than the ones 
         supplied on the Utilities and VGA Drivers Disk.
         *(Super VGA requires 512K Video Memory)

2. To start the Disk Mastering process, use the two disk mastering icons 
   for Windows and Works. The icons are located in the Making Master 
   Diskettes group of Windows. One README.TXT icon is available for an
   explanation of disk mastering. Below is the information from the 
   README.TXT file:

                        Making Master Diskettes

   It is important to make master diskettes for each software package
   factory-installed on your hard drive.  Keep the diskettes in a safe
   place.  You might need to reinstall the software from these diskettes.

   The procedure for making master diskettes has three steps.
   -- copying the master files from the hard drive to the diskettes
   -- checking the diskettes to be sure the master files copied correctly
   -- removing the master files from the hard drive to clear hard disk 
      space
        (This does not remove the working copy of the software.)

   Simple instructions guide you through each step.

   Once you have made master copies of your software, delete the
   Making Master Diskettes group and the C:\DISKS directory.

   Exit this screen by selecting Exit from the File menu. Then, double
   click on a Make Masters program item to begin making master diskettes
   for that software package.


3. Diskettes do not have to be formatted before making the master
   copies. The Disk Mastering Utility will prompt the user through each
   step and notify the user if there are any problems. The user will
   need ten (10) 1.44 MB disks to create all master disks.  Below is a
   list of the disks that will be created by the Disk Mastering Utility:

   For Windows:

      You need six, 3 1/2-inch, high-density diskettes.
      Label the diskettes as follows:

      Diskette     Label                Diskette    Label

         1         Microsoft Windows       2        Microsoft Windows
                   Ver. No. 3.1                     Ver. No. 3.1
                   DISK 1                           DISK 2
                   Setup
         3         Microsoft Windows       4        Microsoft Windows
                   Ver. No. 3.1                     Ver. No. 3.1
                   DISK 3                           DISK 4
         5         Microsoft Windows       6        Microsoft Windows
                   Ver. No. 3.1                     Ver. No. 3.1
                   DISK 5                           DISK 6

   For Works:

      You need three, 3 1/2-inch, high-density diskettes.
      Label the diskettes as follows:

      Diskette     Label

         1         Microsoft Works 2.0
                   DISK 1: Setup, Help, Clip Art 1
                   DISK 2: Program

         2         Microsoft Works 2.0
                   DISK 3: Tutorial 1
                   DISK 4: Tutorial 2

         3         Microsoft Works 2.0
                   DISK 5: Spell, Thesaurus, WorksWizards
                   DISK 6: Microsoft Draw, Converters
                           Clip Art 2, Samples

   For Works Applications:

      You need one, 3 1/2-inch, high-density diskette.
      Label the diskette as follows:

      Diskette     Label

         1         Works Applications


4. If the Disk Mastering icons are not available or have been removed, the
   utilities can still be run from the MS-DOS prompt. The Disk Mastering
   Utility is started by batch files located in the C:\DISKS directory of
   the hard drive. To make the appropriate master disks, simply change
   directory to the disks you wish to create and type in the batch file
   name. Below is an example of the process:

   Note: There are three directories and three batch files that may be 
         used.

             Directory Name               Disk Mastering Batch File

             c:\disks\windows             menuwind.bat
             c:\disks\works               menuwork.bat
             c:\disks\wrksapps            menuwkap.bat

   The c:\disks\windows directory will be used for this example.

       1. Exit the Windows application. This will take you to a DOS prompt.

       2. If you are not already at the C: prompt, type in:

                       cd C:\    and press <ENTER>

       3. Change directories to the WINDOWS directory by typing in:

                       cd C:\disks\windows    and press <ENTER>

       4. Start the Disk Mastering Utility by typing in:

                       menuwin    and press <ENTER>

       5. The menus will prompt the user exactly the same as if started
          from the Window icon.


5. The software license agreement for the machine is included with the
   CPU's owners manual. The page includes the one year warranty information
   as well as the software licensing information.

(/tmc-09/11/95)