1800 HD  (250-3502)          Using a Printer            Faxback Doc. # 1872

To connect a printer to your computer's parallel printer port, do the
following:

1. Prepare the printer for parallel operation according to its user's guide.

2. Turn off your computer.

3. Pull down the hinged cover on the back of the computer, to open the
   serial/parallel port compartment.

Back of Computer
┌───────────────\─────────────────────────────────────────────────────────┐
│                                        ┌───────┐ ┌─────────────────┐    │
│                                        │       │ │                 │    │
│                                        └──/────┘ └───\─────────────┘    │
└──────────────────────────────────────────/────────────\─────────────────┘
                                        Serial Port    Parallel Port

4. Connect the printer cable's DB-25 connector to the connector in the port
   compartment labeled PARALLEL.

5. Connect the printer cable's other end to the printer.

6. Turn on the computer first. Then, turn on the printer.

You can use the printer with most programs. Be sure the computer is set up 
to work with your printer. Check your program's documentation and your 
printer's user's guide for information about setting up and using your 
printer.

(smm 08/06/93)