MMPC Model 10/20  (250-1640/41)     Hard Drive         Faxback Doc. # 2528

Restoring the Hard Drive

If you accidentally delete (or otherwise lose) the entire contents of
your hard drive, follow these instructions to restore the hard drive's
original contents (as shipped from the factory).

>  Note:  Any .GRP and .INI file customization of
   applications is lost when you restore the hard drive.
   After you restore the hard drive, .GRP and .INI files
   that might have previously contained application-specific
   information will contain default information.  The
   C:\SAVED directory contains the previous versions of your
   .GRP and .INI files.  Copy the earlier version of the
   files from C:\SAVED to appropriate directory to restore
   affected applications to their previous settings.

1.  Insert the Utilities diskette into the diskette drive.

2.  Insert the system Disc into the CD-ROM drive.

3.  Restart the computer.

4.  At the MS-DOS prompt, type "setupdos" and press ENTER.

    If a screen message indicates unallocated disk space
    needs to be configured, press FDISK ENTER to begin
    partitioning the hard drive.  After partitioning the
    hard drive, the system restarts.

    At the MS-DOS prompt, type "FORMAT C: /S" and press ENTER to
    format the drive and continue the setup procedure.

    At the MS-DOS prompt, type "setupdos" and press ENTER to
    continue the setup procedure.

5.  Follow the instructions on the screen to install MS-DOS
    and the system utilities.  A prompt is displayed when 
    installation is complete.

6.  Remove the Utilities diskette, and restart the computer.

7.  Type "d:" and press ENTER to access the CD-ROM
    drive.  Then, access the root directory of the CD by
    typing "cd\"and pressing ENTER.

8.  Type "start" and press ENTER.  All factory-installed
    applications are restored on the hard drive.


(smc/csc-08/02/95)