MMPC Model 10/20  (250-1640/41)       Application      Faxback Doc. # 2538

The MMPC Mod 10 came with two CDs and one diskette. These software CDs
contained the following software:

System CD  - MS-Windows (MPC version), Software Toolworks Reference
             Library, Software Toolworks U.S. Atlas, & Software Toolworks
             World Atlas.

Animals CD - San Diego Zoo - The Animals.


The MMPC Mod 20 included the same software, but was packaged on three CDs,
not two, as follows:

System CD  - MS-Windows (MPC version), Software Toolworks Reference
             Library, & Software Toolworks U.S. Atlas.

Animals CD - San Diego Zoo - The Animals

World Atlas CD - Software Toolworks World Atlas.


Applications Appendix

This section provides some detailed information about some of the
applications on your hard drive.

Microsoft Workgroup Connection

Workgroup Connection is provided on the System Disc
included with your computer.  To use Workgroup Connection:

°  your computer must have a network adapter installed and
   be connected to a network.

°  at least one computer on the network must have Microsoft
   Windows for Workgroups, Microsoft LAN Manager, or a LAN
   Manager-compatible network application installed.

To install the application on the hard drive:

1.  Insert the System Disc into the CD-ROM drive.

2.  At the MS-DOS prompt, type:

  "d: \dos60\disk4\wcsetup

and press ENTER.  WCSETUP loads and installs Workgroup
Connection onto your hard drive.

Installing and Removing Applications

Follow these steps to install or remove applications:

>  Note:  If you have customized any applications, the
   customized features will be lost after installation.

1.  Insert the System Disc into the CD-ROM drive.

2.  Type"d:" and press ENTER.

3.  From the Windows Program Manager, open the Main group
    and double click on the WINSTALL icon.

4.  Select the applications you want to install or remove.

5.  Click on "install" or "remove" to perform the
    installation or removal.

Customizing Applications During Installation

You can perform a custom installation of the applications on your hard
drive by running the installation program for the application.  During
installation, you specify system configuration information.

>  Note:  Some applications let you specify system
   configuration settings without reinstalling.  For
   example, you can use the Setup icon in the Main Group
   to select a custom video driver.  Refer to the
   application documentation for more information.

Refer to the device documentation if you are unfamiliar with system
configuration details such as the monitor type, video mode, and mouse
type.  Use the following instructions to customize the applications that
are pre-installed on your hard drive.

Software Toolworks Reference  Library

To install Toolworks Reference Library:

1.  Insert the system Disc into the CD-ROM drive.

2.  At the MS-DOS prompt, type"d:" and press ENTER to access
    the CD-ROM drive.

3.  Type "install" and press ENTER.  INSTALL loads.  Follow
    the instructions on the screen to customize Toolworks
    Reference Library as it is installed.

Windows 

 To custom install Windows:

1.  Insert the System Disc into the CD-ROM drive.

2.  At the MS-DOS prompt, type "d:" and press ENTER.

3.  Type "cd\mwin" and press ENTER.

4.  Type "setup" and press ENTER.  Windows SETUP loads.
    Follow the instructions on the screen to customize
    Windows.

U.S. Atlas and World Atlas

To custom install the Atlas programs:

1.  Insert the System Disc into the CD-ROM drive.

2.  From the Windows Program Manager, select the File
    menu.  Then, select "Run."

3.  Click on "Browse".  Access the root directory of the
    System Disc (D:\).

4.  Click on the text box.  Type "setup" and press ENTER.

5.  Choose the Atlas application you want to install, and
    press ENTER.  SETUP loads.  Follow the instructions on
    the screen to customize the Atlas application as it is
    installed.  If you need to install U.S. and World Atlas
    applications, repeat this step.

Microsoft Works

To custom install works:

1.  From the Program Manager, select the File menu.  Then,
    select "Run."

2.  Click on "Browse." Access the root directory of the
    SystemDisc (D:\).

3.  Type "wrksetup " and press ENTER.  The program loads.
    Follow the instructions on the screen to customize Works
    as it is installed.

America Online

To custom install America On Line:

1.  From the Program Manager, select the File menu.  Select
    "Run."  Then, click on "Browse" and access the WAOL 
    directory on drive D:.

2.  Type "install" and press ENTER.  INSTALL loads.  Follow
    the instructions on the screen to customize America On
    Line as it is installed.

Toolworks Animals

To custom install Animals:

1.  Insert the Animals CD.

2.  From the Program Manager, select the File menu and
    choose "Run."

3.  Click on "Browse."  Select the root directory (D:\).
    Then type setup and press ENTER.  SETUP loads.  Follow
    the instructions on the screen to customize Animals as
    it is installed.


(smc-02/02/94)