SENSATION!  (250-1650)         Modem Options           Faxback Doc. # 2625

Modem Options

The send fax/modem on the sensation is set to COM2 by default.  There are 
no jumpers or DIP switches on the modem to change the com port setting.
If the internal serial port is disabled, the modem will move to COM1 
automatically.

If the send fax/modem is removed, you will lose the answer mode on the 
Sensation.  To have the Sensation's answering machine (using the on-board
modem) and a Send/Receive Fax Modem installed use the following 
COM ports.
     COM1   - Externally
     COM1   - Internally As long as the Serial Port is Disabled in
              SETUPMMS.
     COM3   - Internally
     COM4   - Internally

(tmc-03/21/95)