PRO-2035 1000-Channel Programmable Home Scanner (200-0460) Troubleshooting Faxback Doc. # 16917 If the scanner is not working as it should, these suggestions might help you eliminate the problem. If the scanner still does not operate normally, take it to your local Radio Shack store for assistance. Symptom Suggestion Scanner is on, but will not scan. Be sure SQUELCH is adjusted properly. Scanner receives stations poorly Check the antenna (indoor or not at all. or outdoor). Signals may be blocked from being received by the scanner due to metal frames or material in building. Change the scanner's and try again. Be sure frequencies are programmed properly and set with the correct mode (AM, NFM, or WFM). Scanner's keys or display work The scanner's processor may poorly or not at all. be locked. Restart the scanner. See "Restarting/ Resetting the Scanner." Scanner does not work at all. Check the AC power cord and outlet. The scanner may require a reset. See "Restarting/ Resetting the Scanner." Scanner locks on frequencies that Be sure birdie frequencies have an unclear transmission. are not programmed, or listen to birdie frequencies manually. See "Birdie Frequencies" in "Guide to Frequencies."