HTX-212 Two-Meter Mobile Transceiver
(190-1125)                 Using The Menu             Faxback Doc. # 19132

Your HTX-212 has a menu that lets you select the way some of its functions
work.  The previous sections have included procedures that access this
menu - this section provides an overview.  Follow these steps to use the
menu:

1.  Press VFO.

2.  Hold F for at least 1 second. FUNC flashes.

3.  Press MR.  The first menu item appears.

4.  Press /\ or \/ to select the desired menu option.

5.  Rotate TUNE, or press UP or DOWN on the microphone, to select the 
    option setting.  For options that require a frequency (such as
    scan skip), you can use the microphone keypad to directly enter the
    frequency's last five digits.

6.  Press MR. The HTX-212 saves the settings.

┌──────┬────────────┬───────────────────────────────────────────┐
│Menu  │   Default  │                                           │
│Item  │   Option   │  Explanation/Available Settings           │
├──────┼────────────┼───────────────────────────────────────────┤
│ SC   │     ti     │  Scan resume option.                      │
│      │            │  ti-time out in 10 seconds.               │
│      │            │  Cr-resume after carrier drops.           │
│      │            │  SE-do not resume scanning                │
├──────┼────────────┼───────────────────────────────────────────┤
│ Sd   │    2.0     │  Scan delay (delay before resume when     │
│      │            │  SC is set to Cr). 0.5, 1, 2, or 4.       │
├──────┼────────────┼───────────────────────────────────────────┤
│ S1   │  ---.---   │  Scan skip frequency 1 (frequency for     │
│      │            │  HTX-212 to skip when scanning VFO).      │
├──────┼────────────┼───────────────────────────────────────────┤
│ S2   │  ---.---   │  Scan skip frequency 2.                   │
├──────┼────────────┼───────────────────────────────────────────┤
│ S3   │  ---.---   │  Scan skip frequency 3.                   │
├──────┼────────────┼───────────────────────────────────────────┤
│ S4   │  ---.---   │  Scan skip frequency 4.                   │
├──────┼────────────┼───────────────────────────────────────────┤
│ S5   │  ---.---   │  Scan skip frequency 5.                   │
├──────┼────────────┼───────────────────────────────────────────┤
│ Lb   │     4      │  Look-back time (how often the HTX-       │
│      │            │  212 checks Priority Memory Channel 1     │
│      │            │  for a transmission when the alarm is     │
│      │            │  activated). 4, 8, 12, or 16.             │
├──────┼────────────┼───────────────────────────────────────────┤
│ Ar   │    oFF     │  Auto reply (controls whether the HTX-    │
│      │            │  212 transmits a DTMF memory              │
│      │            │  sequence when it is DTMF paged). oFF     │
│      │            │  or on.                                   │
├──────┼────────────┼───────────────────────────────────────────┤
│ SL   │  144.000   │  Lower scan limit.  With SH, determines   │
│      │            │  the VFO scanning range.                  │
├──────┼────────────┼───────────────────────────────────────────┤
│ SH   │  148.000   │  Upper scan limit.                        │
├──────┼────────────┼───────────────────────────────────────────┤
│ to   │    oFF     │  Time-out option (sets whether the        │
│      │            │  HTX-212 limits transmissions to 3        │
│      │            │  minutes). oFF or on.                     │
├──────┼────────────┼───────────────────────────────────────────┤
│ bP   │    oN      │  Keytone beep option.                     │
└──────┴────────────┴───────────────────────────────────────────┘


(CS 2/22/96)