PRO-2037 Programmable Scanner
(200-0461)                  Operation                 Faxback Doc.# 31133

Changing the AM/FM Mode

The scanner was designed to automatically select the most common receive
mode for each frequency range.  Although the preset mode is correct in
most cases, some ham and military broadcasts do not receive in the default
mode.  When the scanner is not set to the correct receive mode, the
broadcast might sound weak or distorted.

To change the mode press AM/FM.  AM or FM blinks on the display when you
override the default mode.

If you press AM/FM during a limit or direct search, the scanner no longer
uses the default AM/FM mode for each frequency.  The scanner keeps
searching for frequencies in the selected mode and AM and FM blinks on the
display.  AM or FM blinks even if the mode of the frequency is the same as
the default setting.  To return to the default settings, press AM/FM while
holding down CLEAR.


LIMIT SEARCH

Limit search lets you search for active frequency within the range you select, so you can choose which ones you want to store.

1.  Press PROGRAM, then LIMIT. Lo appears on the display.

2.  Using the number keys, enter the lower limit of the Frequency range.

3.  Press ENTER, then LIMIT Hi appears on the display.

4.  Using the number keys, enter the upper limit of the frequency range
    and press ENTER

5.  Press the up arrow to search from the lower limit to the upper limit,
    or the down arrow to search from the upper limit to the lower limit.

6.  When the scanner stops press MONITOR to store the freq. in a current
    monitor memory.


DIRECT SEARCH

When the scanner is stopped on a frequency, you can search up or down from
the current displayed frequency to find more frequencies you want to
store.

1.  Press MANUAL or PROGRAM.

2.  Use the number keys to enter the frequency you want to start the
    search from, or use the number keys to to enter the channel nunmber
    containing the starting frequency.

3.  Press MANUAL or PROGRAM.

4.  Press the up arrow to search up from the frequency or the down arrow
    to search down from the selected frequency.

5.  When the scanner stops press MONITOR to store the frequency in a
    current monitor memory.


(IR/ir-07/29/96)