PRO-39 Programmable Scanner (200-0303) Operation Faxback Doc. # 31918 Turning Banks On and Off The scanner splits the 200 channels into ten banks of 20 channels each. The small bars under the numbers at the top of the display are the bank indicators. You can turn each bank on or off. When you turn off a bank, then the scanner does not scan any channel in the bank. While scanning, press the number key corresponding to the bank you want to turn on or off. If the memory bank indicator is on, the bank is turned on and the scanner scans all channels within that bank that are not locked out. If the indicator is off, the scanner does not scan any of the channelswithin that bank. You can manually select any channel in a bank, evenif the bank is turned off. You cannot turn off all banks. One bank is always active. (IR-03/21/96)