Flashlight
(610-2546)                 Operation                  Faxback Doc. # 32796

INSTRUCTIONS

How to Use:  Move ON/OFF all the way forward to ON.  To turn the flashlight
OFF, return the switch to MID.

Charging Tips:  Charge your flashlight for 48 hours in a standard 120VAC
outlet before using it for the first time. To do this, slide ON/OFF back as
far as it will go, exposing the plug-in prongs and swinging them out 90
degrees.  Plug the prongs directly into any standard 120VAC household
outlet that cannot be turned off by a wall switch.  Unplug the flashlight
after you charge it and store it in a convenient location.  The flashlight
holds a usable charge for up to one year at room temperature.

DC Charging: The adapter consists of a mounting bracket that the flashlight
plugs into, a plug that fits a standard automotive cigarette lighter
receptacle, a 4-foot cord, and a flexible strap to keep the flashlight in
the bracket.  For best results, install the mounting bracket on a flat
surface where it can be easily reached in an emergency. Plug the flashlight
into the mounting bracket, put the flexible strap across the bracket to
hold the flashlight in place, and plug the adapter all the way into the
cigarette lighter to ensure proper charging.  To use the flashlight, remove
the strap and pull the flashlight straight out of the bracket.  Cut the
cigarette lighter plug from the line cord and use an appropriate wire
termination to wire directly to your car's electrical system.  Connect the
striped wire to a positive terminal (unswitched accessory such as the radio
fuse) and the plain wire to ground.  This enables direct wire charging.


(YO/EB 5/6/96)