MPS-31  (320-1152)               Operation             Faxback Doc. # 15383

Turning Power On

1.  Turn VOLUME to 0.

2.  Push POWER up to turn on the amplifier.  The power indicator lights.

3.  Push POWER down to turn off the amplifier.

Controlling the Sound

Rotate TREBLE clockwise to boost, or counterclockwise to cut the
frequencies in the high frequency range (around 5 kHz).  (Boosting the
treble gives your sound a stinging, cutting high end.)

Rotate BASS clockwise to boost, or counterclockwise to cut the frequencies
in the low bass range (around 80 Hz).  (Boosting the bass gives you a
warmer tone).

Rotate MID clockwise to boost, or counterclockwise to cut the midrange
frequencies (around 800 Hz).  (Boosting the midrange gives you a fatter,
harmonic-rich sound.)

Rotate VOLUME clockwise to increase the Volume, or counterclockwise to
decrease it.

Rotate DISTORTION to obtain the desired amount of distortion.

Here are examples of how to use the control settings for different sounds.
Experiment with the settings until you find the combination that best
suits your style.

Type of Sound      Distortion   Volume   Treble    Mid   Bass

Heavy Metal            10          8       10      10    10

Rock                   2           6       7       5     5

Clear                  OFF         5       6       6     7

Using the MPS-31 As a Portable Public Address System

You can use the MPS-31 as a portable PA system with a directional dynamic
microphone (not supplied) that has an on/off switch.


(br/all-05/30/95)