Pre-School Play Buggy
(600-2572)             Installing The Batteries       Faxback Doc. # 18388

Your Pre-School Play Buggy brings you hours of fun.  You can watch it race
forward or spin in circles.  It features a realistic acceleration sound
and its electronic horn really works!

The buggy requires four AA batteries, and its controller requires one 9
volt battery.  We recommend alkaline batteries, such as Radio Shack Cat.
No. 32-552 and 23-553.

CAUTIONS:  Use only fresh batteries of required size and type.

           Never leave dead or weak batteries in the Pre-School Play
           Buggy.

           If you plan not to use it for several days, remove the
           batteries.

           Dispose of batteries properly; do not bury or burn them.

           Do not mix old and new batteries.

To install the batteries:

1.  Use a Phillips screwdriver to remove the screws on the Play Buggy's
    and controller's battery compartment covers, then remove the covers.

2.  Install four AA batteries into the Play Buggy's battery compartment,
    and a 9-volt battery into the controller's battery compartment, as
    indicated by the polarity symbols (+ and -) marked inside the
    compartments.

3.  Replace the covers.

NOTE:  If the Pre-School Play Buggy moves slowly or not at all, replace
       the batteries with fresh ones.


(PH 11/7/95)