Motorized 8-Inch Mirror Ball
(420-3046 )                Preparation                Faxback Doc. # 33888

WARNING:  To prevent fire or shock hazard, do not expose this system to
          rain or moisture.

SELECTING A MOUNTING LOCATION

Select a location for the Mirror Ball that is:

   Sturdy enough to withstand the weight of the motor and the Mirror Ball
   (try to find a wall stud).

   Near an AC outlet (a 6-foot AC cord is supplied).

MOUNTING

NOTE:  To keep from getting fingerprints on the glass we recommend that you
       wear gloves when you hold the Mirror Ball.

1.  Using the motor's mounting bracket as a template, mark the locations
    for the three mounting screws.

2.  Drill three holes 1/8 inch in diameter at the marked locations.

3.  Using a Phillips screwdriver and the three supplied wood screws, mount
    the motor in the selected location.

4.  Use the supplied "S" hook to hang the Mirror Ball's ring on the motor's
    ring.  Make sure the Mirror Ball is attached securely.

5.  Use mounting hooks (not supplied) to fasten the AC power cord to the
    ceiling or wall between the mounting location and the AC outlet.  Use
    an extension cord if necessary.

WARNING:  If the AC cord is left hanging from the mounting location, sharp
          glass edges from the Mirror Ball might cut the wire's insulation
          and cause a shock hazard.


(YO/EB 5/19/96)