Digital Multimeter  (220-0195)     Specifications     Faxback Doc. # 14073


DISPLAY: ................................................ 3-2/3 Digit, LCD

ACCURACY

DC Volts
  300mV - 3V - 30V - 300V - 3000V: ............... +/- 0.8% of reading and
  Max Measurement = 1000V                          +/- 0.2% of full scale,
                                                       +/- 1 in last digit
AC Volts
  3V - 30V - 300V - 3000V: ......................... +/- 1% of reading and
  Max Measurement = 750V RMS                       +/- 0.5% of full scale,
                                                       +/- 1 in last digit
                                                               at 50/60 Hz
  45 Hz to 500 Hz at 30V Range: .................. +/- 1.5% of reading and
                                                   +/- 0.5% of full scale,
                                                       +/- 1 in last digit
  500 Hz - 10 kHz at 30V Range: ................... +/- 10% of reading and
                                                   +/- 0.5% of full scale,
                                                       +/- 1 in last digit

DC Current
  300 mA - 30 A: ................................. +/- 1.5% of reading and
  Max Measurement = 10 A                           +/- 0.2% of full scale,
                                                       +/- 1 in last digit

AC Current
  300  mA - 30 A: ................................ +/- 1.5% of reading and
  Max Measurement = 10 A                           +/- 0.5% of full scale,
                                                       +/- 1 in last digit

Resistance
  300 ohm - 3 - 30 - 300 - 3000 kohm: ............ +/- 1.5% of reading and
                                                   +/- 0.2% of full scale,
                                                       +/- 1 in last digit
                                                +5 digit maximum @ 300 ohm
  30 Megaohm: ...................................... +/- 3% of reading and
                                                   +/- 0.2% of full scale,
                                                       +/- 1 in last digit

Continuity Function: ............................ Continuity buzzer sounds
                                                   with less than 295 ohms
                                                 (+/- 20 ohms) resistance.
                                                     The buzzer sounds for
                                                   100-150 ms after inputs
                                                              are shorted.

Diode Check Function: ........................ For checking semiconductors
                                                     open, short or normal


Specifications are typical; individual units might vary.  Specifications
are subject to change and improvement without notice.

(TLC/all-03/09/95)