Analog Range Tester  (220-0216)     Specifications     Faxback Doc. # 9673

CONTROLS

Function switch: ............................................. Rotary type
Functions: ............................ DC V; AC V; OHM; CONTINUITY; DC mV
                                      AC mV; DC mA, A; AC mA, A; BATT TEST
Range UP switch: ............................................... Tact type
Range DOWN switch: ............................................. Tact type
Auto Range IN/OUT switch: ...................................... Push type
Power ON/OFF switch: .......................................... Slide type

MECHANICAL SPECIFICATIONS

Operating Temperature: .................................. 0 - 50 degrees C
Storage Temperature: .................................. -20 - 60 degrees C
Dimensions: ............................................ 124 x 170 x 40 mm

ELECTRICAL SPECIFICATIONS

Accuracy
  DC Voltage
    300mV/3V/12V/60V/300V: ..................... +/-3% of full scale value
    1000V: ..................................... +/-4% of full scale value

  AC Voltage
    300mV/3V/12V/60V/300V: ..................... +/-4% of full scale value
    1000V: ..................................... +/-4% of full scale value

  Resistance: ....................... +/-3% of full scale length (102.1mm)
    100 ohms: .............................................. 86 - 115 ohms
    1 Kohm: ............................................ 0.86 - 1.15 Kohms
    10 Kohms: ........................................... 8.6 - 11.5 Kohms
    100 Kohms: ............................................ 86 - 115 Kohms
    1000 Kohms: ......................................... 860 - 1150 Kohms

  Continuity Function: ........................ approx. less than 300 ohms
  DC Current (300mA/3A): ....................... +/-3% of full scale value
  AC Current (300mA/3A): ....................... +/-4% of full scale value

Low Battery Indication: .................................... >/= 2.0 Volts

Minimum Operating Voltage (Nominal): ........................... 2.0 Volts
Minimum Operating Voltage (Limit): ............................. 2.2 Volts

Sound Pressure Level at 5 cm (when the test lead is shorted):
  Nominal: ......................................................... 75 dB
  Limit: ........................................................... 65 dB

Battery Current at standby mode: ................................ </= 15mA

Threshold of Auto Change Range

  AT DCV/ACV
    Range up: ................................... 90% +/- 6% of each range
    Range down: ................................. 13% +/- 6% of each range

  AT RESISTANCE
    Range down: .......................... 90% +/- 6% of full scale length
    at Resistance scale (nominal): .................................... 24
    at Resistance scale (limit): .................................... 2-38

    Range up: ............................ 13% +/- 6% of full scale length
    at Resistance scale (nominal): .................................. 1.4K
    at Resistance scale (limit): ................................ 800-3.9K

Input Impedance
  For DCV (millivolt): ......................................... 1.08 Mohm
  For DCV: ................................................... >/= 10 Mohm
  For ACT: ................................................... >/= 10 Mohm


Specifications are typical; individual units might vary.  Specifications
are subject to change and improvement without notice.

(TLC/all-03/10/95)