Handsfree Speakerphone  (170-0735)     Installation    Faxback Doc. # 15181
Car Kit

NOTE:  This unit must only be used with negative ground (chassis) vehicles.
       Maximum supply voltage is + 15.6 volts.

1.  Secure the mounting plate (1) to a suitable place in your vehicle with
    the supplied screws.  Choose the location of the mounting plate to
    provide the most comfortable position and the best visibility of the
    phone's display in all lighting conditions.

2.  Slide the handsfree speakerphone (2) onto the mounting plate (1).

3.  Clip the microphone (3) to a suitable place near the driver's mouth,
    usually the sunvisor.  Try to attach the microphone to a surface that
    is mechanically quiet to reduce background noise while you are using
    the phone.

4.  Plug the microphone into the jack on the handsfree speakerphone.

5.  Connect the external mobile antenna to the handsfree speakerphone
    antenna lead (2a).

6.  Plug the handsfree speakerphone coil cord connector (2b) into the
    socket on the base of the phone.

7.  Firmly place the phone in the holder (2c).

8.  Plug the power cable connector (4a) into the handsfree speakerphone
    (2).

9.  Insert the power cable connector (4b) into the vehicle's cigarette
    lighter socket.


(LB/all-05/08/95)