Handsfree Speakerphone  (170-0735)      Operation      Faxback Doc. # 15182
Car Kit

When the phone is in the handsfree speakerphone holder, it automatically
operates in handsfree mode.  You can talk on the phone with it mounted in
the holder using the built-in speaker and external microphone.

We recommend you use the phone's Auto Answer mode.  Using this mode, the
phone automatically switches from standby to answer after the first ring of
an incoming call.

To end a call press the phone's END key.

Removing The Phone

Follow these steps to remove the phone from the holder:

1.  Squeeze the side of the coil cord connectors and unplug it from the
    phone.

2.  Using the thumb and forefinger, firmly squeeze and release the levers
    on the side of the holder.

3.  Lift the phone out of the holder.

When the phone is removed from the holder, handsfree operation is replaced
by normal handset operation.

Charging

The phone's battery charges when the coil cord connector is attached to
the phone, and the power cable is connected to both the handsfree speaker-
phone and the vehicle's cigarette lighter socket.

The phone displays the charging status.  See the CT-352 owner's manual
for details.

Replacing The Fuse

In the indicator does not light, the fuse in the cigarette lighter charger
or the vehicle's fuse box might be blown.

Follow these steps to remove the charger's fuse:

1.  Unscrew the tip on the end of the cigarette lighter plug.

2.  Replace the fuse with an identical 2A, 125V fuse (Cat. No. 270-1052).


(LB/all-05/08/95)