ET-290  (430-0585A/6/7)         Operation              Faxback Doc. # 15732

MOUNTING THE PHONE

Note:  The phone company can charge you for the installation of the
       necessary jacks.  The USOC number of the jack to be installed is
       RJ11C (or RJ11W for a wall installation).

USING THE PHONE

Plug the handset cord into the jacks on the base and handset.

Switch to TONE or PULSE to match the type of service you have.
If you have pulse (rotary) service, you can press TONE during a call to
use tone services.

Press * or # for special services.

Press the switchhook to end a call.

Switch the ringer ON or OFF.  You can still make calls with the ringer
off.

Press RESET to end a call without hanging up the handset.

Press REDIAL to dial the last number dialed (up to 31 tone or 32 pulse
digits).

Plug the handset cord into the jacks on the base and handset.


(llg/all-06/26/95)