ET-330 Cordless Electronic Telephone System
(430-0267)                 Security Code              Faxback Doc. # 19217

ENTERING THE SECURITY CODE 

Understanding the Security Code 

The exclusive programmable security code feature built into your ET-330
will prevent unauthorized use of your phone line.  Each time you press
TALK, your personally selected security code is automatically transmitted
from the Handset to the Base Unit.  The Base Unit compares the code from
the Handset with its security code.  If the two codes are the same, you
may proceed with the call; if they are not the same, the Handset will
sound an error signal and the TALK indicator will go off.

Once you have entered the security code, the above "verification" procedure 
takes place automatically each time you press TALK. 

To Enter the Code 

1.  Press the CODE ENTER button on the back of the Base Unit.  You will  
    hear a short tone from the Handset and its TALK indicator will light. 

2.  Enter any four-digit number on the Handset keypad.  (Use 0-9 keys
    only.)  The TALK indicator will go off and you will hear another short 
    tone. 

Your security code has now been entered in the Handset and the Base Unit. 

Security Code Hints 

    The security code will be lost, and must be re-entered, if you allow
    the Handset battery pack to discharge completely or if you unplug the
    Base Unit without having a backup battery installed.  If the code is
    lost, you will hear the error signal when you press TALK. 

    Enter the security code "before" you install the backup battery. 

    The security code prevents other cordless telephones from initiating or
    answering a call on your phone line.  It does not prevent other radio
    units on the same frequency from inadvertently hearing your
    conversation or causing interference on your ET-330; this can happen
    with any cordless telephone. 

    You may program more than one Handset with the same security code. 


(CS 12/19/95)