Duofone-100 Automatic Telephone Memory  Dialer
(430-0279)                 Troubleshooting            Faxback Doc. # 19588

IF YOU HAVE PROBLEMS

Be sure the AC Power Supply plug is properly connected and that the AC
outlet is "live".

If AC is OK, Dialing/Store indicator will flicker when pressing [ENTER].

If power seems OK, but the DUOFONE-100 will not dial out a number (or dials
incorrectly), try the following:

1.  Is the AC Power cord connected?  The DUOFONE-100 will not dial without
    AC Power Supply.

2.  Is the DUOFONE-100 properly connected?

3.  Is the DUOFONE-100 rear panel switch set to 10 PPS?  Some of the older
    telephone exchanges/switching stations can not handle the faster 20
    PPS dial rate.

4.  If numbers will not hold in memory, replace the batteries.  Use our
    Extra-Life type (23-582).

IF YOU STILL HAVE PROBLEMS

Disconnect the DUOFONE-100 immediately.

If other phones then function normally, the fault is in the unit or its
installation.

If you're unable to locate the problem, bring the unit to your local Radio
Shack.  They have the personnel, parts, and service to get your DUOFONE-100
back in service as quickly as possible.


(CS 1/22/96)