The Clip
(430-0168)                 Operation                  Faxback Doc. # 19634

1.  Before removing the adhesive strip's backing, clean both THE CLIP and
    the item's mounting surface with rubbing alcohol.  Any oil or dirt
    residue or surface temperatures below 60 degrees Fahrenheit (15 degrees
    Celsius) will prevent proper bonding. 

2.  Remove the white backing on the adhesive strip and place face down on
    the short side of THE CLIP.  Using your thumb, apply maximum pressure
    to all areas. 

3.  Remove the clear backing from the adhesive strip.  Align THE CLIP, 
    adhesive side down, carefully on the item.  Apply maximum pressure. 

4.  During the next 72 hours use THE CLIP, but do not test its adhesive
    strength and keep it above 60 degrees Fahrenheit (15 degrees Celsius). 

THE CLIP is cleanly removable with pliers.


(EB 2/21/96)