ET-274 Slim Phone
(430-0594)                 Preparation                Faxback Doc. # 19648

SETTING THE RINGER SWITCH

Your telephone has a RINGER OFF/LOW/HIGH switch.  Set the switch as
follows:

OFF  - The telephone does not ring.  You can still answer incoming calls 
       (if an extension phone rings) and make outgoing calls. 

LOW  - The ringer sounds a quiet tone.  Use this setting when a ringing 
       phone might disturb someone else, but you still need to hear the 
       ringer. 

HIGH - The ringer sounds a normal tone.

SETTING THE TONE/PULSE SWITCH

Set the TONE/PULSE MODE switch for the type of service you have.  If you
are not sure which type of service you have, do this test.

1.  Set TONE/PULSE MODE to TONE.

2.  Lift the handset and listen for a dial tone.

3.  Press any number button other than 0.  If the dial tone stops, you
    have touch-tone service.

    If the dial tone continues, you have pulse service.  Set TONE/PULSE
    MODE back to PULSE.

NOTE:  The # button does not function when TONE/PULSE MODE is set to
       PULSE.


(EB 2/13/96)