Dover Fashion Fone
(430-0859)                 Operation                  Faxback Doc. # 19956

USING THE PHONE

Turn the ringer on or off.  You can make calls with the ringer off, and you
can receive calls with the ringer off, if you hear another phone on the
same line ring or see the LED light.

Switch to T (Tone) or P (Pulse) to match the type of service you have.  If
you have pulse (rotary) service, you can switch to T during a call to use
tone services.

Press MEMORY once before you enter the location number for the phone
number you want to store or dial.  See "Storing/Dialing Numbers in Memory,"
below.

The LED lights when the phone rings, even when the ringer is off.

Press the hookswitch to disconnect a call.

Press REDIAL to dial the last number dialed (up to 31 tone or 32 pulse
digits).

Press FLASH instead of the switchhook for special services such as call
waiting.

Press STORE once to enter the telephone number you want to store.  See
"Storing/Dialing Numbers in Memory," below.

Press and hold PRIVACY to switch off the microphone during a call so you
can listen to your caller without being heard.

STORING/DIALING NUMBERS IN MEMORY

To store a number into memory:

1.  Lift the handset and press STORE.

2.  Enter the telephone number you want to store, up to 15 digits in tone
    mode and 16 digits in pulse mode.

3.  Enter the number (P1-P3) for the one-touch memory location, or press
    MEMORY once and enter the number (0-9) for the speed-dial memory
    location where you want to store the phone number.

4.  Repeat Steps 1-3 to store additional numbers.  Return the handset to
    the cradle when you finish storing numbers.

Use the handset's index sheet to record stored numbers.

To dial a number in memory:

1.  Lift the handset.

2.  Press the number for the one-touch memory location (P1-P3), or press
    MEMORY and enter the speed-dial memory location number for the phone
    number you want to call.


(PH/all-03/12/96)