SPP-ER1 Cordless Telephone
(430-8006)                 Transferring Calls         Faxback Doc. # 31216

To Transfer from the Handset to the Base Unit

1.  As your party to wait.

2.  Press INTERCOM on the handset.
    The call will be put on hold.

3.  When the base unit rings, press SPEAKERPHONE on the base unit.

4.  You can speak between the handset and the base unit.

5.  Press TALK on the handset.
    The call will be transferred to the base unit.

If no one answers at the base unit.

Press INTERCOM on the handset again.  You can talk with your party again.

NOTE:  When transferring from the handset to the base unit, the call will
       be disconnected if TALK is pressed before SPEAKERPHONE on the base
       unit is pressed.

To Transfer from the Base Unit to the Handset

1.  Ask your party to wait.

2.  Press INTERCOM on the base unit.  The call will be put on hold and the
    HOLD lamp lights up.

3.  When the handset rings, press TALK.  You can also receive intercom by
    pressing any dialing keys (1 to 9, 0, * and #).  The TALK lamp will
    blink.

4.  You can speak between the base unit and the handset.

5.  Press SPEAKERPHONE on the base unit.  The call will be transferred to
    the handset.

If no one answers at the handset

Press INTERCOM on the base unit.  You can talk with your party again.

Making Conversation among the Caller, Handset, and Base Unit

During intercom for transferring a call, press HOLD on the base unit. 
Communication among the caller, handset, and base unit starts.

To shift to conversation between the caller and the handset
Press the SPEAKERPHONE on the base unit.

To shift to conversation between the caller and the base unit
Press TALK on the handset.

To shift to intercom between the base unit and the handset
Press HOLD on the base unit.


(CS 3/7/96)