Neon Desktop Squiggle Phone
(430-0834)                 Installation               Faxback Doc. # 31413

CHOOSING A LOCATION

Choose a location that is out the way of normal activities and near a
phone jack.

CONNECTING TO THE PHONE LINE

1.  Plug one end of the supplied modular cord into the modular jack on
    the back of your phone.

2.  Plug the cord's other end into the phone line jack.

CONNECTING POWER TO THE NEON LIGHT

The built-in neon light is powered by standard AC power using the supplied
AC adapter.

1.  Push the barrel plug of the supplied AC adapter into the 12V DC JACK on
    the back of the phone.

2.  Plug the other end of the AC adapter into a standard AC outlet.

CAUTIONS:  You must use a class 2 AC adapter that supplies 12V DC and
           delivers at least 300mA.  Its center tip must be set to
           positive, and its plug must correctly fit the phone's 12V DC
           JACK.  The supplied AC adapter meets these specifications. 
           Using an adapter that does not meet these specifications could
           seriously damage your phone or the adapter.

           Always unplug the adapter from the AC outlet before you unplug
           it from the phone.

CONNECTING THE HANDSET CORD

To connect the handset cord, plug one end of the supplied coiled cord into
the jack on the left of the base.  Then plug the other end into the jack on
the handset.

You local Radio Shack store sells a wide selection of longer coiled handset
cords and phone line cords.


(CS 3/18/96)