Telephone Amplifier System
(430-0200)                 Operation                  Faxback Doc. # 32057

The amplifier can pass only one side of a conversation at a time.  The
party that speaks first has priority.

PLACING A CALL

Follow these steps to place a call and use the amplifier:

1.  Lift the phone's handset and dial the telephone number.

2.  After the person answers, press AMPLIFIER until it locks.  Then hang
    up the handset.

3.  Speak toward the amplifier.

4.  As the person responds, adjust VOLUME for the desired volume level.

5.  To end the call, press AMPLIFIER to release the button.

ANSWERING A CALL

When the phone rings, press AMPLIFIER until it locks.  Then, speak to the
caller and adjust VOLUME as needed.

To end the call, press AMPLIFIER to release the button.

USING PRIVACY

The amplifier's privacy feature prevents the other party from hearing you,
even though you can still hear the other party.  This feature is also
useful by helping you listen to a weak connection or helping you hear the
other party if you are in a noisy area.

Press PRIVACY until it locks.  This prevents the other party from hearing
you.  When you want to talk to the other person, press PRIVACY to release
the button.


(CS 12/7/95)