Telephone Amplifier System
(430-0200)                 Troubleshooting            Faxback Doc. # 32059

If you have a problem with the amplifier, check the following information
to solve the problem.

           PROBLEM                  SOLUTION
__________________________________________________________________________

The amplifier does not work.       Check the connection to the phone line.
__________________________________________________________________________

You cannot place a call.           Check the phone line connection.

                                   The AMPLIFIER button is ON (locked) when
                                   you lift the handset.  Press AMPLIFIER
                                   to release the button.  Then pick up the
                                   handset and dial the number.
___________________________________________________________________________

You cannot hear the other party.   The background noise around the 
                                   amplifier will not allow it to receive
                                   the other party's transmission.  Press
                                   in PRIVACY, or press and release
                                   AMPLIFIER and use the phone as normal.
__________________________________________________________________________
                                                                       
The other party cannot hear you.   The PRIVACY button is locked.  Press and
                                   release PRIVACY.
___________________________________________________________________________

The telephone line is weak or      There is a poor connection.  Speak 
noisy.                             louder or ask the other party to speak
                                   louder.  Also, redialing the call might
                                   help.

                                   Someone picked up another phone on the
                                   same line as the amplifier, causing the
                                   volume to drop slightly.  Have the 
                                   person hang up the phone.

                                   There is not enough phone line current 
                                   to power the amplifier.  Connect an                         
                                   optional 9V, 300 mA AC adapter as
                                   described under "Connecting the 
                                   Amplifier, see Faxback Doc.#     ,               
                                   Installation.
__________________________________________________________________________

The voice from the speaker is      The VOLUME setting is too high.  Adjust
distorted.                         Volume to a lower setting.
__________________________________________________________________________


(CS 12/7/95)