DUoFONE-195 Speakerphone
(430-0610)                  Operation                 Faxback Doc. # 32065

SETTING DAY AND TIME

1.  Set the MODE switch to PROGRAM.  The letters PRG will falsh on the
    display.

2.  Press SET DAY/TIME.  The PRG display stops flashing and wil stay lit.

3.  Press the * button.  Each time * is pressed, the day display will
    advance one day.  After you reach the correct day, enter the time.

4.  Enter the current time using the number buttons.

5.  To enter PM, press the # button.  Each press on the # will alternate
    between AM and PM.  For PM, the display shows PM.  There is no
    indicator for AM.

6.  If you wish to set precise time, using accurate time signal such as
    radio or TV, set the time slightly ahead of actual time.  Then set the
    MODE switch to NORMAL at the correct number.  Seconds will start
    counting.


(IR-03/04/96)