Mobile Mounting Kit for CT-302
(170-0606)                 Operation                  Faxback Doc. # 32776

INSERTING AND REMOVING THE PHONE

Place the phone in the holder bracket by aligning the grooves on the side
of the phone with the protrusions on the inside of the bracket.  The
bracket has a special safety catch that keeps the phone locked in place.

To remove the phone from the bracket, tilt the top of the phone forward and
lift the phone out of the bracket.

USING THE CIGARETTE-LIGHTER ADAPTER

The supplied cigarette-lighter adapter lets you recharge and power the
phone in your vehicle.

To connect the adapter, plug the coiled cord's power tip into the bottom of
the phone.  Be sure you align the adapter's tabs with the slots on the
bottom of the phone.  Then, plug the cigarette-lighter adapter into your
vehicle's cigarette-lighter socket.

The phone continues to charge until it is fully charged, whether or not it
is in use or turned on.

NOTE:  If the battery is too hot or too cold to charge, the green indicator
       flashes.  The phone waits for the battery to return to a normal
       temperature before it begins charging.

The cigarette-lighter adapter has a two-color indicator to show you the
charging stage.  If the indicator is not lit, the cigarette-lighter adapter
is not properly connected.  when the indicator lights red, the phone is
quick-charging (charging the battery to full capacity).  When the indicator
lights green, the phone is trickle-charging (maintaining a full charge).

FUSE REPLACEMENT

If the indicator does not light, the fuse in the cigarette-lighter adapter
or the fuse in the vehicle's fuse box might be blown.

To remove the old fuse in the adapter, unscrew the tip on the end of the
cigarette-lighter plug.  Replace the fuse with the supplied spare fuse or
an identical 3A fuse.

USING AN EXTERNAL ANTENNA

When you use your phone in a vehicle, we recommend you use an external
antenna.  Most popular types of cellular antennas are available at your
local Radio Shack store.

For antenna installation, follow the instructions included with the
antenna.  Then, route the antenna cable to the external antenna jack on the
end of the cigarette-lighter adapter.

Be sure to the ANTENNA switch to EXT.

If you operate the telephone on the inside of the vehicle with the flexible
antenna, set the ANTENNA switch to INT.

NOTE:  You can use an external antenna if the adapter is plugged into the
       cigarette-lighter socket and power is supplied to the adapter.


(ALL-05/15/96)