TAD-1010 900 MHz Digital Cordless Telephone w/ Digital Multi-User Ans. Sys.
(430-0771)                 Battery                    Faxback Doc. # 33527

INSTALLING THE BACKUP BATTERY

If the AC power fails or you unplug the TAD-1010, a 9V backup battery
(not supplied) saves the messages and the settings for the day, time, and
security code.  We recommend you use an alkaline-battery, such as Radio
Shack Cat. No. 23-553.

Follow these steps to install the backup battery.

CAUTIONS:  Before you replace the battery, be sure the supplied adapter is
           securely connected to an AC outlet and to the jack on the back
           of the TAD.  Otherwise, you might lose any stored information.

           Always use a fresh battery of the required size and type.

           Dispose of the battery promptly and properly.  Do not bury or
           burn it.

1.  Remove the battery compartment cover on the bottom of the base by
    sliding the cover in the direction of the arrow.

2.  Snap the battery's contacts firmly to the battery connector, then place
    the battery into the compartment.

3.  Replace the cover.

Replace the battery if ( + / - SYMBOL) flashes while the AC adapter is
properly connected.


(BR/EB 6/3/96)