NOKIA-232 Cellular Telephone
(170-1986)                 Menu                       Faxback Doc. # 34234

MENU FUNCTIONS

USING THE MENU

The menu allows you to:

- view the current setting of certain functions, and to change the setting
  of any function to one of the options offered (e.g. Lights on or off.

- to select an action offered directly (e.g. Keyguard or Data Mode).

- to view information (e.g. Call Timers).

There are two methods of accessing menu functions:

- 'menu' method (press MENU, use /\ or \/ and press STO).

- 'shortcut' method (press MENU and enter a function number).

See menu method and shortcut method below.

The number of the menu function currently selected is shown in the upper
right corner of the display.

Some menus are 'secure', and you must enter the lock code or security code
before you can access them.  On selecting a menu of this type, you will be
prompted with one of these messages:

LOCK CODE? - you should enter your 4-digit lock code (default 1234) and
             then press STO, or

SECURITY? -  you should enter your 5-digit security code (default 12345),
             and then press STO.

Normally, your dealer will give you these code numbers when you purchase
the phone.  It will be helpful to memorize them.  Do not leave them written
where they can be recognized.  You may change the lock code, using menu 11,
but you cannot change the security code.

To access the menu using the menu method:

1.  Press MENU.  The "USE /\, \/ TO VIEW message" prompts you to scroll the
    menus.

2.  Press /\ or \/ to scroll the functions until the one you want is displayed.

3.  Press STO to select the function. If prompted, then enter the lock code
    or security code, and press STO.

    The option currently selected, or status, may be displayed.  Some menu
    functions, such as ACTIVATE KEYGUARD, carry out an action immediately,
    and require no further keypresses.

4.  To change the setting to any of the options offered, press /\ or \/ to
    scroll the options until the one you want is displayed.

5.  To select the option displayed (or to accept the lock code or PIN code
    entered), press STO.

6.  To quit the menu function, without changing the setting, press CLR (or
    wait for the timeout).

To access the menu using the shortcut method:

1.  Press MENU, then enter the number of the menu function required (see
    'List of Menu Functions', below).

2.  If prompted, then enter the lock code or security code, and press STO.

The option currently selected, or status, may be displayed (the menu
function name is not displayed first, when using the shortcut method).

When selecting menu 1: there will be a short pause before the message for
menu 1 appears.

Some menu functions, such as ACTIVATE KEYGUARD carry out an action
immediately, and require no further keypresses.

3.  To change the setting to any of the options offered, press /\ or \/ to
    scroll the options until the one you want is displayed.

4.  To select the option displayed (or to accept the lock code or PIN code
    entered), press STO.

5.  To quit the menu function, without changing the setting, press CLR (or
    wait for the timeout).


(LB/EB 07/19/96)