NOKIA-232 Cellular Telephone (170-1986) Menu Functions (10-18) Faxback Doc. # 34236 Clearing the Last Numbers Dialed (MENU 10) This function allows you to set the phone to clear, or retain, (auto- matically) the last numbers dialed when the phone is switched off. The phone automatically stores the last five numbers dialed; refer to 'Last Number Redial', on Faxback Doc. # 34232, for further details. To clear or retain the last numbers dialed: 1. Press MENU 10. 2. Press /\ or \/ to select CLEAR LAST ON (to clear the numbers) or CLEAR LAST OFF (to retain the numbers). 3. Press STO to confirm the setting. Changing the Lock Code (Menu 11) This function allows you to change the lock code of your phone. (You will need to enter your security code in order to change the lock code.) To change the lock code: 1. Press MENU 11. The message SECURITY? prompts you to enter your security code. 2. Enter the five-digit security code (default 12345), and press STO. If you entered an incorrect code, the message CODE ERROR will appear. When you have entered the correct security code, the message NEW CODE? prompts you to enter your new lock code. 3. Enter the new four-digit lock code and press STO. The code may contain numeric digits only; other characters (e.g. #, *) are not allowed. The message STORED confirms that the new lock code has been set. Data Mode (Menu 12) This function allows you to send data, while in a call. Your phone must be connected to a Fixed Handsfree Car Kit or a data-compatible accessory in order to send data. 1. Press MENU 1 2. You must have a call in progress, otherwise the message NO CALL ACTIVE is displayed. When the phone is in data mode, the message DATA ACTIVE is displayed. For further information on sending and receiving data, refer to the user guide supplied with your data adaptor (e.g.FDP-1, FDM-2). Emergency Number Key (Menu 13) This function allows you to set the one-touch dialing function for the emergency key (9) to on or off. ON Allows you to make an emergency call by pressing and holding 9 for three seconds. NOTE: This function does not operate if keyguard is on, or if you are already in a call. OFF Disables the ability to make an emergency call using the 9 key. This setting may be useful to prevent making unwanted emergency calls (e.g. by accidentally holding the key), without having to disable all keys by setting keyguard to on. To set the emergency key to on or off: 1. Press MENU 13. The message LOCKCODE? prompts you to enter your lock code. 2. Enter your 4-digit lock code (default 1234). The number will be displayed as asterisks (****), then press STO. If the correct lock code has been entered, the currently selected option will be displayed. 3. Press /\ or \/ to select EMERGENCY 9 ON or OFF. 4. Press STO to confirm the setting. Call Barring (Menu 14) This function allows you to restrict certain types of calls: No Barring (ALLOW ALL) The phone operates normally (no call restrictions). International Call Barring (ALLOW NATIONAL) International calls cannot be dialed (see note below). All other outgoing calls and incoming calls are allowed. NOTE: This option only bars calls having a specific international dialing prefix, as programmed by your dealer. If any other international prefix is in use on your system, and you dial that prefix, then you will still be able to make international calls, even if this option is selected. With this option selected, it may still be possible to make any international call via the operator. Local Only (ALLOW LOCAL) Only calls to local numbers having seven digits (or less) and emergency calls can be made (emergency calls can be made by normal dialing or by using one-touch (9) dialing). Incoming calls are allowed. NOTE: With this option selected, it may still be possible to make any call via the operator. Memory Calls Only (ALLOW M90-95) Only calls to numbers stored in memory locations 90 to 95 and emergency calls can be made (emergency calls can be made by normal dialing or by using one-touch (9) dialing). You may recall numbers from locations 90 to 95, but will not be permitted to store numbers to these locations. Incoming calls are allowed. NOTE: This option effectively takes memories 90 to 95 out of the memory locking scheme (Menu 15), and makes them readable. These memories will be readable, even if the MEM NO ACCESS Memory Lock option is selected. The Lock Phone function (Menu 0), on Faxback Doc. # 34235, however, sets full barring and locking so that no memories are accessible. All these options will be temporarily overridden if the phone is locked (to lock the phone, use Menu 0), on Faxback Doc. # 34235. To set the call-barring option: 1. Press MENU 1 4. The message SECURITY? prompts you to enter your security code. 2. Enter your 5-digit security code (default 12345). The number will be displayed as asterisks (*****), then press STO. If the correct code has been entered, the currently-selected option will be displayed. 3. Press /\ or \/ to select the call-barring option you prefer. 4. Press STO to confirm the setting. Memory Lock (Menu 15) This function allows you to restrict access to all memory locations. MEM NORMAL The phone operates normally (no memory restrictions). MEM READ ONLY Storing is not allowed to any location (but any location can be recalled). MEM NO ACCESS Storing or recalling is not allowed (all locations). NOTE: This option will be partially overridden (i.e. for locations 90 or 95) if the ALLOW M90-95 Call Barring option (Menu 14), on Faxback Doc. # 34236, is selected. To set the memory-locking option. 1. Press MENU 15. The message SECURITY? prompts you to enter your security code. 2. Enter your 5-digit security code (default 12345). The number will be displayed as asterisks (*****), then press STO. If correct code has been entered, the currently-selected option will be displayed. 3. Press /\ or \/ to select the memory-locking option you prefer. 4. Press STO to confirm the setting. You may recall your own number (in location 99), at any time, regardless of the MEM NO ACCESS memory locking option. You cannot use the memory linking function to link to a memory that is barred from recall by the MEM NO ACCESS option. For (limited) access to memories 90 to 95 only, use the Call Barring function (Menu 14), on Faxback Doc. # 34236. Select the ALLOW M90-95 option to allow recall (only) of locations 90 to 95 inclusive, regardless of the Memory Lock option selected. The ALLOW M-90 option thus given some override to the Memory Lock MEM NO ACCESS restrictions. Selecting Keyguard (Menu 16) Keyguard can prevent accidental operation of the keys (i.e., when the phone is being carried in a pocket or bag). When keyguard is activated no keypresses are accepted, and no keypress tones will be heard. Emergency calls can be made. WARNING: Making emergency calls: When keyguard is on, one-touch dialing of an emergency number (i.e. by pressing 9) does not operate (this is intended to avoid accidental dialing) However, you may dial an emergency number by entering the emergency number and pressing SEND. To activate keyguard: 1. Press MENU *, or press MENU 16. When keyguard is active: - The KEYGUARD ACTIVE message appears. - If any key (except MENU) is pressed, PRESS "MENU" is displayed (prompting you to de-activate keyguard). On pressing MENU, NOW TYPE "*" is displayed pressing * then sets keyguard to off, and the message KEYGUARD OFF is displayed. - If you receive a call, press SEND to answer the call (any-key answering is disabled). During a call, keyguard is not active, and you can operate the phone as usual. - If an incoming call is not answered, the CALL message remains on the display until any key is pressed. - Calls to emergency numbers can be made by entering the emergency number and pressing SEND. When an emergency call is ended, the keyguard becomes active again. If you attempt to activate keyguard during a call, the KEYGUARD ACTIVE message is shown for a while, and keyguard actually becomes active just after the call is ended. To de-activate Keyguard: 1. Press MENU *. When keyguard is de-activated, the message KEYGUARD OFF appears, and the phone then operates in the normal way. Sending DTMF Data (Menu 17) You can transmit numerical information as a series of tones, using the DTMF facility (i.e., to check for messages in your answering machine). There are two ways to send DTMF tones: 1. Manual Dialing: 1.1 Make the call in the usual way. 1.2 When the call has been answered, enter the numbers. Each number is sent immediately, as a DTMF tone. The length of the tone depends on how long you press the key. 2. Automatic Dialing: 2.1 Make the call in the usual way. 2.2 When the call has been answered, use the RCL key to recall a stored 'DTMF' number from a memory location (i.e., for location 23, press RCL 23). 2.3 To send the whole number (displayed) as DTMF tones, press MENU SEND, or MENU 17. A series of tones, each tone representing a digit of the DTMF number, will be heard. The special characters '+', 'p' and 'w' are used for DTMF dialing; these are available on the * key. For examples, refer to 'Examples of DTMF and hook flash numbers' (below). To place a pause between DTMF digits (when entering the number): Press * * *. The 'p' character will be displayed. When the DTMF number is sent, a pause of 2.5 seconds will be inserted automatically. Placing a 'wait' character (when adding a DTMF string to a phone number, or requiring a 'wait' within a DTMF string): It is necessary to place a 'wait' character ('w') between a phone number and the subsequent DTMF string. In addition, you may include a 'w' character at any point in a DTMF string, if required. On reaching each 'w' character, the phone 'waits' for you to press SEND. On pressing SEND, the phone will automatically send as DTMF all the numbers or digits following the 'w' (until the next 'w', if any, is reached). You can also press MENU SEND or MENU 17 at this point to send DTMF. To enter a wait character (to precede a DTMF string, or within the string): 1. Recall the phone number, or enter the number, as appropriate. 2. Press * * * * . The 'w' (wait) character will be displayed, after the phone number. 3. Enter the DTMF number (i.e. after the 'w' character). 4. To enter a 'w' character within the DTMF number, press * * * *. 5. Store the whole sequence in a memory location. To send DTMF numbers: 1. Recall the phone number from memory using the RCL key. 2. Make the call in the usual way (i.e. press SEND). 3. When the call has been answered, press SEND again to send the DTMF number. 4. If any further wait character is encountered, within the DTMF string, press SEND again to send the remaining part of the DTMF string. 5. To stop DTMF sending, press CLR. Note that when the keypress tones are switched off, the DTMF tones are still sent, even though they cannot be heard. To join two memory locations, in order to send a long DTMF string: 1. Recall the phone number to the display (the location in which this is stored is called the 'first' location, in these instructions). 2. Press * *. The '+' character will be displayed after the phone number. 3. Enter the number (one or two digits) of a 'second' memory location which is to be linked to that already selected. Store the new contents in the 'first' location. 4. Enter the DTMF digits and store in the 'second' memory location. To make a call using the two joined locations. 1. Recall the 'first' location, and press SEND. This dials the phone number, but the dialing sequence stops on reaching the '+' character. 2. When the call is established, press SEND. This will cause the phone to send automatically the DTMF sequence in the 'second' location. NOTE: '+', p' and 'w' cannot be keyed while in a call; * pressing will send a DTMF tone only. SID (Menu 18) - Only available in models where this feature is available. System Identity (SID) information can be programmed into the phone by your dealer (the identities of specific networks on which the phone will operate can be programmed into each NAM). NOTE: This menu will appear only if SID information has been programmed into the selected NAM (use Menu 7 to select a NAM). You may set the 'SID Screen' function to on or off (SID SCRN ON/OFF) Depending on (1) the programmed information, (2) the system selected (using Menu 1), and (3) the actual availability of networks in your area, setting SID to on or off will provide the following conditions: - SID SCRN ON: Your phone may be able to select the programmed (i.e., low- cost) type of network. However, you may experience poor call quality if only distant networks of this type are available. If no service is available on this type of network, then the message SID SCRN BARRED will appear, and the NO part of the NO SVC indicator will flash. In this instance, you may be able to make emergency calls, but will not be able to make any other calls, or receive any calls. - SID SCRN OFF: You will always obtain the highest-quality call possible. However, the phone may roam, and the cost of calls when roaming may be greater (refer to 'System Select [Menu 1]', on Faxback Doc. # 34235). To set SID to on or off: 1. Press MENU 18. The message LOCKCODE? prompts you to enter your lock code. 2. Enter your 4-digit lock code (default 1234). The number will be displayed as asterisks ****, then press STO. On entry of the correct code, the currently-selected option will be displayed. 3. Press /\ or \/ to select SID SCRN ON or OFF. 4. Press STO to confirm the setting. The phone will use this setting in a few seconds. Using the Hook Flash Function Your cellular system may offer a 'hook flash' service. This system feature lets you accept or make a second call when you already have a call in progress, or send other information to the network, such as credit card numbers. After the phone number has been entered, you can add extra information which is for 'hook flash' sending; for example see below. Contact your cellular service provider for further details. Examples of DTMF and Hook Flash Numbers After the phone number part of a number has been entered, you can add extra information which is for DTMF sending or 'hook flash' sending. - Following the phone number, you can enter a 'p' (pause) to separate digits, allowing the following digits to be sent as a 'hook flash' when you press SEND again (see 'Example 1' below). - Following the phone number, you can enter a 'w' to cause a 'wait'. When SEND is pressed again, the reminder of the number is sent as DTMF (see 'Example 2' below). - When you 'hook flash' send a number, you can use 'p' to follow it with another 'hook flash' sending, or 'w' to follow with DTMF sending. - You can use '+' to link a DTMF sequence to another memory location (memory linking) (see 'Example 3' below). - You can 'p' as a 2.5 second pause, and 'w' as a 'wait' for SEND' within a DTMF sequence (see Example 4' below). - You can always force the number on the display to be sent as DTMF by keying MENU SEND. The special characters '+', 'p' and 'w' are available on the * key. Press * twice for '+', three times for 'p' and four times for 'w' (if you miss the character, just keep pressing the key). Example 1: 1234p456 Calls number 123 when SEND is pressed, leaving 456 on the display. Pressing SEND again sends the number 456 as a 'hook flash'. Example 2: 123w456 Calls the number 123 when SEND is pressed, leaving w456 on the display. Pressing SEND again sends the number 456 as DTMF. Example 3: 123+22 Calls the number 123 when SEND is pressed, leaving the contents of memory 22 on the display. Pressing SEND again will either 'hook flash', or send as DTMF the contents of memory location 22 (DTMF if the memory contents start with a 'W'). Example 4: 123w2p3+45 Calls the number 123 when SEND is pressed, leaving w2p3+45 on the display. A second press of SEND sends the number 2 as DTMF, causes a 2.5 second pause, sends the number 3 as DTMF, then sends the contents of memory location 45 as DTMF. NOTE: If you need to send a 'hook flash' after a DTMF sequence, and wish to type in the whole sequence to start with, you can use '+p' in the DTMF sequence to stop DTMF sending and wait for SEND to be pressed again. This allows the following digits to be sent as a 'hook flash'. (LB/EB 07/19/96)