Pronto Pager
(170-7040/1/2/3)             Operation                Faxback Doc. # 34279


SETTING THE TIME

To set the time do as follows;

1.   At the time display, repeatedly press the smaller of the two buttons
     until the pager displays SET TIME

2.   Press the larger button. The hour Digits flash.

3.   Repeatedly press the small button to select the current hour.

4.   Press the large button. The First Min. Digit flashes.

5.   Press the small button to select the correct digit.

6.   Press the large button. The second Min. Digit flashes.

7.   Repeatedly press the small button to select the correct digit.

8.   Press the large button. A or P flashes.

9.   Press the small button to select the desired time of day (A for AM or
     P for PM.

10.  Press the large button again to store the time you just set and
     return to the time display.


(IR-08/16/96)