CT-356 Cellular Phone w/40 Number Memory 
(170-1070)                 Security Features          Faxback Doc. # 34407

LOCKING AND UNLOCKING THE PHONE

You can use the 4-digit lock code to prevent outgoing calls from being made
The lock code is set by the dealer when your phone is activated.

NOTES:  Locking the phone does not prevent calls to the emergency numbers
        programmed when your phone was activated or to lock-free memory 20.

        When the phone is locked, you can only answer calls by pressing
        SEND. Any key answer to disabled.  Also, you cannot store or recall
        any memory number.

1.  Press MENU 1.

    The phone prompts you for the 4-digit lock code (LOCKCODE?).

2.  Enter your lock code and press STO.

If you were locking the phone, the phone displays LOCKED to remind you that
the phone is locked.  If you were unlocking the phone, the phone briefly
displays UNLOCKED to confirm that the phone is unlocked.

If you made a mistake in entering the lock code, the phone displays CODE
ERROR.

TURNING KEYGUARD ON/OFF

You can use keyguard to prevent accidental operation of the phone's keypad
(for example, when the phone is in a purse or pocket).

To turn keyguard on or off, press MENU, then *.  You can also turn on key-
guard by pressing and holding END for 1 second.  This is a convenient way
to activate keyguard when you end a call.

When keyguard is on, the phone displays KEYGUARD ACTIVE.  When you press a
key, the phone first prompts you to press MENU (PRESS MENU) and then * (NOW
PRESS *) to turn off keyguard.  The phone briefly displays KEYGUARD OFF to
show that keyguard is now off.

When keyguard is on:

  To answer a call, press SEND. During the call the keypad remains unlocked
  and the phone can be operated normally.

  To end a call, press SEND.  After the call disconnects, keyguard auto-
  matically turns back on.

  You cannot turn off the phone.

  One-touch emergency dialing does not operate.  However, you can make an
  emergency call by manually dialing the emergency number programmed into
  your phone (911 or other programmed emergency number).  The phone does
  not display any digit until you enter the entire number.

TURNING ONE-TOUCH EMERGENCY DIALING ON/OFF

You can make an emergency call to the primary emergency number
preprogrammed into your phone by your service provider by pressing and
holding 9 WXYZ for 1 1/2 seconds, when one-touch emergency dialing is
turned on.

Follow these steps to turn one-touch emergency dialing on or off.

1.  Press MENU 8 TUV.

2.  Press STO.  The phone displays EMERG. 9 ON (if one-touch emergency
    dialing is on) or EMERG. 9 OFF (if one-touch emergency dialing is off).

3.  Press /\ or \/ to select ON or OFF.

4.  Press STO to save your selection.


(LB/EB 08/15/96)