ET-148  Speakerphone with 20-Number Memory  
(430-0612A)                Specifications             Faxback Doc. # 34433

Power Requirement: ...................... Phone line, two AAA batteries,
                                    Optional AC Adapter (AC 120 V/DC 6V)

Connector: .................................. USOC Type RJ-11C or RJ-11W

Pulse Dialing Rate: ............................................. 10 pps

Break Ratio: ...................................................... 60 %

Inter-Digital Pause: ............................................ 850 ms

Access Pause: ........................................ Approx. 2 seconds

Tone Dialing: ............................................ Standard DTMF

Pulse Mode: .................................................. 16 digits

Tone Mode: ................................................... 15 digits

Redial Memory Capacity:

  Pulse Mode: ................................................ 32 digits

  Tone Mode: ................................................. 31 digits

Dimensions: ........................ 4 1/16 x 6 3/8 x 8 7/8 Inches (HWD)
                                                 (104mm x 163mm x 225mm)

Weight: ............................................. 2 lb 13 oz (930 g)


OPERATING PARAMETERS

This information is supplied to assist answering possible technical
questions from your phone company.

Interface: .................................................. Loop start

Ringer: ........................................ Standard bridged ringer
                                            20-60 Hz sine or square wave
                                                40-105 Volts ring signal

Current: ...................................... 6-15 Volts DC (off hook)
                                                                20-70 mA

Resistance: .......................................... 10M Ohm (on hook)
                                                      300 Ohm (off hook)

(LB/EB 08/22/96)