CT-500 Flip-Style Cellular Telephone
(170-1071)                 Glossary                   Faxback Doc. # 34523

Message Glossary

'                             (Apostrophe), scrolling activated

0                            Feature is selected (also indicates a pause
                              in memory)

A                             How * is displayed when stored in memory

Alpha                         Alpha Entry is selected

Al + Off                      Ring Alert canceled

Answer                        Automatic Answer selected

Autoloc                       Automatic Lock selected

Al                            Two-System Operation
                              (Active system is non-wireline,
                              using phone number 1)

A2                            Two-System Operation
                              (Active system is non-wireline,
                              using phone number 2)

B_ _ _ _                      Battery Voltage Meter
                              (number of bars indicates
                              relative level of voltage).

B1                            Two-System Operation. # 

                              (Active system is wireline,
                              using phone number 1)

B2                            Two-System Operation
                              (Active system is wireline,
                              using phone number 1).

Beep                          One Minute Beep Timer selected

BUSY                          Master Reset or Master Clear
                              is in progress

C                             Precedes Cumulative Timer display
                              (also how # is displayed
                              when stored in memory)

Call                          Shows incoming call
                              (also indicates call absence)

Change?                       Memory Protect is activated
                              to prevent accidental overwriting
                              of a memory location

Clear?                        Memory Protect is activated to
                              prevent accidental overwriting
                              of a memory location

Emergcy                       Emergency Dialing initiated

Empty                         Name memory is empty

Emr Off                       Emergency Dialing cancelled

Flat Off                      Keypad Tones cancelled

Full                          All memory locations are full
                              or requested block is unavailable

Hana HF                       Handsfree AutoSwitch is selected

Home                          System Type Selection (Home mode)

Level 1                       Service level selected

Level 2                       Service level selected

Level 3                       Service level selected

Level 4                       Service level selected

Level 5                       Service level selected

Level 6                       Service level selected

Loc                           Precedes unlock code when displayed

Locked                        Unit is locked

Low Bat                       Low battery

MKey                          Multiple key answer

Mute                          Microphone muted

Name                          Name-first memory review

on                            Telephone is on

PinActive                     Simplified PIN Code Dialing

R                             Precedes display of Resettable Call Timer

Redial                        Automatic Redial selected

S _ _ _ _                     Signal Strength Meter (SSM)
                              (number of bars indicates
                              relative signal strength)

Scan A                        System Type Selection
                              (scan non-wireline "A" only)

Scan AB                       System Type Selection
                              (scan "A" type first, then "B")

Scan B                        System Type Selection
                              (scan wireline "B" only)

Scan BA                       System Type Selection
                              (scan "B" type first, then "A")

Screen                        Incoming Call Screening selected

SID                           System Type Selection

Std                           All user features set to standard

Std AB                        System Type Selection
                              (non-wireline standard mode)

Std BA                        System Type Selection
                              (wireline standard mode)

Timer                         Automatic Display Timer selected

Trb off                       One-Touch Dialing Disabled

TT Off                        Silent Scratch Pad selected

V                             Volume Meter (number of bars
                              indicates relative volume level)

Vox                           Voice Operated Transmission selected

This product may be powered by a rechargeable battery which must be
recycled or disposed of properly.

    Refer to the battery label for battery type.

    Recycling facilities may not be available in all areas.


(BR/EB 9/3/96)