TAD-412  (430-0399)          Status Indicators          Faxback Doc. # 6151

Indicator Summary Chart
───────────────────────────────────────────────────────────────────────────
Indicator      Status                  Indicates that the TAD-412 is"
───────────────────────────────────────────────────────────────────────────
POWER          Steady                  The TAD-412 is turned on and is
                                       ready to operate.
───────────────────────────────────────────────────────────────────────────
ANSWER         Steady                  The TAD-412 is ready to receive
                                       calls in the ANSWER mode.

               Slow Flash              The TAD-412 has recorded at least
                                       one new incoming message.  (It is
                                       still in the ANSWER mode and ready
                                       to receive calls)

               Fast Flash              The TAD-412 is answering a call.

               Off                     The TAD-412 is in the other modes
                                       than ANSWER.
───────────────────────────────────────────────────────────────────────────
MEMO           Steady                  The TAD-412 is ready to record the
                                       outgoing announcement or a memo.

               Slow Flash              The TAD-412 has recorded a new memo.

               Fast Flash              The TAD-412 is rewinding the
                                       outgoing tape to the beginning in
                                       ANN. RECORD mode.
───────────────────────────────────────────────────────────────────────────
ANSWER and     ANSWER-                 The incoming tape has come to the
MEMO           Slow Flash              end during recording an incoming
               MEMO-Fast               message.
               Flash

               Both Slow               The TAD-412 has recorded both a new
               Flash                   incoming message and a new memo.

               Continuous              *  The outgoing tape has come to
               Three Fast                 The end while recording the
               Flashes                    outgoing announcement.

                                       *  The outgoing or incoming tape
                                          is torn.

                                       *  The microprocessor in the TAD
                                          has become "confused" by
                                          conflicting instructions.
───────────────────────────────────────────────────────────────────────────

(RLR-02-24-94)