Caller ID System 250  (430-0956)  Specifications       Faxback Doc. # 7124

Power..................................................9V Alkaline Battery
                                                        2.5 to 8 Milliamps
Ringer Equivalency Number (REN).......................................0.1B
Effective Impedance of 1.0 REN....................................8000 ohm
Effective Impedance of 0.5 REN...................................16000 ohm
Facility Interface Code (FIC)...................................Loop Start
Service Order Code (SOC)..............................................RJ11
Memory Capacity...................................................85 Calls
Dimensions............................3 5/16 x 3 5/8 x 1 7/16 Inches (HWD)
Weight................................................................5 oz

Operating Parameters

The following information is supplied to help you answer questions from
your phone company.

Interface.......................................................Loop Start
Ringer.............................................Standard Bridged Ringer
                                              20-60 Hz Sine or Square Wave
                                                  40-130 Volts Ring Signal
Resistance..........................6 Megohm (On Hook), 300 Ohm (Off Hook)

Specifications are typical, individual units might vary.  Specifications
are subject to change without notice.

Optional Accessory:
AC Adapter (Cat. No. 273-1670 or Express Order No. 11265360
available through CMC).........................................9 V, 200 mA


(br/ir-03/29/95)