TAD-325  (430-0396)           Specifications           Faxback Doc. # 7500

GENERAL

Power Requirement:............................................120 V, 60 Hz
Power Consumption:................................................12 watts
Dimensions
   (H x W x D):.........................................2-1/5" x 10-1/3" x
                                               7-4/5" (5.6 x 26.3 x 20 cm)
Weight:................................................3 lb 4 oz (1.75 kg)
Accessories:........................................Endless tape C-60 tape
                                                   Tool for setting REMOTE
                                                             CODE switches

Tape Recorder

Tape Speed:................................................1 7/8 ips (4.75
                                                                  cm/sec.)
                                                     Incoming and Outgoing
Wow & Flutter:.................................0.3 % Incoming and Outgoing
Rewind Time:...................................................115 seconds
S/N Ratio:.....................................35 dB Incoming and Outgoing
Frequency Response:..................- 4 dB at 500 Hz and - 2 dB at 3 kHz,
                                   (1 kHz reference) Incoming and Outgoing
Distortion:......................................4 % Incoming and Outgoing
Erase Ratio:...................................40 dB Incoming and Outgoing
Sensitivity (Rec/Play at 1 kHz):............- 13 dBm Incoming and Outgoing
Outgoing Input:............................- 60 dBm at microphone terminal
         Output:.......................................600 ohm on the line
Incoming Input:......................................- 3-0 dBm on the line
         Output:.......................................600 ohm on the line
Remote Control
   Sensitivity:.......................................- 40 dBm on the line

Answering Machine

Number of Rings
   Before Answering:................................1 or 4 (approximately)
Maximum Incoming
   Message Time:...................................30 seconds or 3 minutes
VOX Operation Time
   Without Voice:..........................................5 sec. - 9 sec.
CPC Detection Time:.........................................280 ms or 6 ms

CPC Invalid Time at Beginning of Outgoing Message:...............2 seconds

Operating Parameters

This information is supplied to assist you in answering possible technical
questions from your telephone company.

Interface:......................................................Loop start
Ringer:..........................Standard bridged ringer 15.3 - 68 Hz Sine
                                   or square wave 40-105 volts ring signal
Current:.........................................20 - 130 mA DC (off hook)
Resistance:.........................................More than 100 Mohm (on
                                                  hook)/290 ohm (off hook)

(LB/all-03/27/95)